Change the Priority of Wireless Networks in Windows 8 or 10 | You can try how to do it.

how to change the priority of wireless networks in windows 8 or 10.

How to Change the Priority of Wireless Networks in Windows 8 or 10

 Windows automatically connects you to Wireless Networks you've been connected to before. If you're in a location where there are multiple wireless connections that have been previously connected, Windows uses a system priority to select a Wi-Fi network.

How to See Your Priority Wireless Networks

Windows 10 shows the priority of your Wireless Networks in Settings. To see the list, Go to Settings>Network & Internet > Wi-Fi > Manage Known Networks.

This list shows the wireless networks listed in the order they are prioritized. Windows will connect to the wireless network from the first section, if available, and then move down the list. To change the order of the list, you must use the command prompt.


If you don't want Windows to connect you to certain wireless networks in the future, you can click here and select “Forget”. Windows will not automatically connect you to that network unless you choose to connect to it.


How to Change Your Wireless Network Priority

To change the priority manually, you must use the Administrator Command Prompt. To open it, right-click the Start button and select “Command Prompt (Admin)”.


Run the following command to see a list of saved Wifi networks in order of their priority. This will display the same list you see in Settings:

netsh wlan show profiles

You should remember two things here: The interface name and the name of the wireless network that you want to prioritize.

For example, the interface name here is “Wireless Network Connection” and the selected network to prioritize is “Tjandra Home”.


To prioritize wireless networks, run the following command, replacing “wifi-name” with the name of the Wi-Fi network, “interface-name” with the name of the Wi-Fi interface, and “#” with the priority number you want to assign to the Wi-Fi network. Fi.

netsh wlan set profileorder name="wifi-name" interface="interface-name" priority=#

For example, to retrieve the Remora network on the Wi-Fi interface and make it the number one priority on the list, we would run the following command:

netsh wlan set profileorder name="home tjandra" interface="Wireless Network Connection" priority=1


You can also run the netsh wlan show profiles command again and you should see the network you chose to prioritize appears first in the list. The order in Settings will also change.


Hopefully, this article about Change the Priority of Wireless Networks in Windows 8 or 10, gives you a little insight. Also, read an article about Change User Account Type in Windows 10 that you may need to know. Thank you.

Previous Post Next Post