Bad Sector Repair in Windows 10

bad sector repair windows 10.
I upgraded to Windows 10. When creating a hard disk image for backup, Windows 10 reported that the backup failed because of bad sectors. Can anyone tell me how to repair bad sectors in Windows 10? The drive I am checking is the main driver of the C: system.

What should I do if the hard disk has bad sectors in Windows 10/8/7?
A bad sector is a sector on a computer disk drive or a flash memory that cannot be accessed or written due to physical damage on the surface. The disk or flash transistor failed. When there are bad sectors on your hard disk, the data in the bad sectors may be lost. Therefore, you must perform bad sector repair on the Windows 10 hard drive. You can use disk utility software such as CHKDSK, SCANDISK, Windows built-in bad sector repair tool, or the best bad sector repair software to detect or repair bad sectors.

Use Windows built-in tools to repair bad sectors in Windows 10
Step 1. Open this PC, right-click the system drive, and select properties.
Step 2. Go to Tools, and click Verify. Click "Verify" under "Error Checking".
Step 3. View the scan results, and then click "Scan and Repair Drive".
Step 4. Choose when to repair the file system. Wait for Windows 10/8 to scan and repair bad sectors on the hard drive.

Run Chkdsk / f for bad sectors in Windows 10
System File Checker is a Windows utility that allows users Search for damaged Windows system files and restore damaged files. This tool can also scan all sectors of the disk volume to find bad sectors. Let us see how to use CMD to delete bad sectors from the hard drive.
To use this tool, open a command prompt and type the following commands at the command prompt and press Enter after each command:
* sfc / scannow
* chkdsk c:/f/r (correct errors and restore data as much as possible)
* bootrec / fixmbr
* bootrec / fixboot
* bootrec / scanos
* bootrec / rebuildbcd

AOMEI Partition Wizard Check for bad sectors in Windows 10
AOMEI Partition Wizard is a professional disk manager. The check partition function can directly help you to check bad sectors of the hard disks in Windows 10/8/7 with a few clicks. To use AOMEI Partition Assistant to check bad sectors, you can follow the steps below:
Step 1. Download AOMEI Partition Assistant and start the software. In the main interface, right-click the partition to be verified, select "Advanced", and then select "Verify Partition".
Step 2. Select the error verification method to be performed. As you can see from the screenshot below, there are three options, just select the last one "Check for bad sectors on partition". Then click "OK" to go to the next step.
Step 3. Click the "Start" button to verify.

To verify the disk, you can right-click the disk and select Surface Test.
After the bad sectors are found, the bad sectors can be subdivided into separate unallocated spaces. In this case, it will not affect the data in the good sector, and the operating system will know not to try to store data in this bad sector.
AOMEI Partition Assistant is also a disk copy software. When you find too many bad sectors, you can consider changing to a good one. You can use the Quick Copy Disk method to copy data from a disk to a new disk, it will not copy bad sectors to the new disk.

Hopefully, this article about Bad Sector Repair in Windows 10, gives you a little insight. Also, read an article about Basic Arduino Program Code Collection and Functions that you may need to know. Thank you.

Previous Post Next Post